Product
Catalog
Explore our complete range of engineered solutions - from high-performance insulation boards and vibration isolation systems to absorption panels and sealants.
All Products
20 items found
SG-E17
SG-E17 composite sound insulation board with an IIR damping layer between high-density Calcium Silicate layers. Supplier laboratory result: Rw 33 dB for the tested sample. Installed performance depends on the complete assembly and installation.
SG-C10
Lightweight composite sound insulation board with 9mm GYP, 1mm IIR damping layer, and 7mm FCB. Achieves 32dB sound reduction. Ideal for residential, hotels, cinemas, and recording studios.
SG-CN10
Moisture-resistant composite sound insulation board with 9mm M.GYP, 1mm IIR damping layer, and 7mm FCB. Achieves 32dB sound reduction. Ideal for humid environments, residential, recording studios, cinemas, and clubs.
SG-F8
Composite sound insulation board with 8mm and 7mm Fibre Cement Board layers bonded by a 1mm IIR damping core. 16mm total thickness, 32dB sound reduction. Ideal for residential, studios, cinemas, and entertainment venues.
SG-F12-2
Composite sound insulation board for acoustic floor systems, combining 6mm and 12mm Fibre Cement Board layers with a 2mm IIR damping core. 20mm total thickness with 38 dB (Rw) sound reduction. Ideal for residential, studio, cinema and entertainment floor assemblies.
SG-AF
7 mm acoustic flooring: 0.5 mm PVC, 4 mm LVT and 2.5 mm EVA with a UV coating. Ln,w = 63 dB for the tested flooring configuration; this is an impact sound level, not a reduction.
SG-CD50
Ceiling shock damper designed for low-frequency vibration control. Heavy-duty spiral spring with polymer damping rubber provides low-frequency vibration isolation. 50kg load capacity per unit.
SG-WD50
Wall shock damper that interrupts solid-borne sound at the wall interface using a load-bearing metal U-frame and viscoelastic damping rubber. 50kg load capacity per unit.
SG-FD50/25
Floor damping block produced through specialized compression process combining polymer rubber granules with high-quality cork particles. 880 kg/m³ density. Available in 50mm and 25mm. Ideal for floating floor systems.
SG-DM102
Vibration damping mat formulated with fine iron powder, modified mineral powder, calcium carbonate, and PVC. 2mm thickness, 1m x 10m roll. Ideal supplementary layer for wall and ceiling soundproofing systems.
SG-DM1010
Vibration damping mat engineered with High-Density NBR (Nitrile Butadiene Rubber) for superior vibration damping and impact noise reduction. 10mm thick, 1m x 9.8m roll. Ideal for floor systems.
SG-DM452
High-density vibration damping tape using stabilized polymer damping material combined with heavy mineral powder. 45mm x 6m peel-and-stick. Ideal for metal studs and wall frames.
SG-DM612A
Aluminium-faced damping sound insulation pad manufactured using high-purity imported materials combined with a high-density polymer damping base. 610 x 610mm peel-and-stick for multi-application use.
SG-DM612B
Non-aluminium-faced damping sound insulation pad with a high-density polymer damping core protected by anti-stick release paper on both sides. 610 x 610mm peel-and-stick for gypsum, plywood, OSB, and cement board.
SG-SD10
Heavy-duty vibration isolation pad designed for single or dual 18-inch and single 15-inch subwoofers. 16 vibration-isolating springs and 4 limiting screws. 200kg load capacity per set of 4.
SG-SD27
Heavy-duty vibration isolation pad designed for dual 18-inch and dual 21-inch subwoofers. 22 vibration-isolating springs and 3 limiting screws. 600kg load capacity per set of 4.
AcousPanel
PET fibre acoustic panels with 48 colour options. ENF formaldehyde-emission classification; not detected (<0.005 mg/m³) under the stated test conditions.
SG-AS65
Specially formulated acoustic sealant for sealing gaps in building materials and metal interfaces. Contains no solvents or corrosive agents. Rw 31 dB for the tested sealed assembly.
SG-PL
Pressure lock handle that improves door sound insulation by applying adjustable compression between door and frame, reducing gaps and sound leakage. Durable zinc alloy with multiple lock and latch configurations.
Cassette Keel
Cold-rolled hot-dip galvanized steel cassette keel framing system with main, sub, and edge keels plus M8 hardware. Provides the decoupled structure that secures acoustic boards while preserving acoustic isolation.
No products found in this category.
